Customer Service Agreement (Buyer Terms and Conditions)
These Purchase Terms and Conditions form a binding agreement between Vendor (Shenzhen AS Prototypes Co., Limited, operating as AS Prototypes via asprototypes.com) and Customer as purchaser of custom manufacturing services. Email confirmation or a Purchase Order (PO) directing Vendor to proceed signifies Customer’s acceptance of these terms and conditions.
Quoted Fees, Taxes, and Duties: Customer agrees to pay all fees and charges as they become due or payable in the amount quoted. The price does not include any applicable sales, use, or similar taxes (“Sales Tax”), and Customer will also be liable for all import duties and taxes.
Payment Terms: Both parties agree to the payment terms stated on the quotation, or otherwise all invoices are due in full without deductions or offsets. If Customer fails to pay amounts due, Vendor may suspend manufacturing performance and retains full legal title to all parts until full payment is received.
Order Modification and Cancellation: Since Vendor custom manufactures each part on demand, Vendor cannot modify or cancel an order after placement (1) once applicable materials have been cut, used, or otherwise processed, or (2) for any non-stock or special-order materials specially quoted and procured for this order.
Engineering Changes and Revised Data: Manufacturing begins upon receipt of final part data files from Customer, and submitting revised part data after project kick-off may affect pricing and lead times. If Customer requests design changes or specification modifications after Purchase Order receipt, Customer agrees to pay any resulting additional costs incurred by Vendor.
Ex-Factory Lead Times: All quoted lead times refer strictly to Ex-Factory Production and Inspection Turnaround, excluding international air transit (typically 3–5 business days via DHL, FedEx, or UPS). Production schedules commence only after written Design for Manufacturability (DFM) confirmation and order kick-off.
Quoted lead times are good-faith estimates rather than binding guarantees. While Vendor makes commercially reasonable efforts to meet target ex-factory dispatch dates confirmed at order placement, estimated turnaround schedules do not bind Vendor to delay penalties.
Shipping Terms and Risk of Loss: Unless otherwise agreed in writing, all parts are sold Ex Works (EXW) Vendor’s Shenzhen facility (Incoterms® 2020), and risk of loss passes to Customer upon carrier handover (with legal title retained until full payment). Special packaging or delivery accommodations must be arranged prior to shipment and may incur extra fees.
CAD Data Precedence and File Accuracy: Customer is solely responsible for supplied file accuracy, and Vendor is not liable for discrepancies between files. When both 3D Computer-Aided Design (CAD) models and 2D drawings are provided, nominal geometry follows the 3D CAD model, while 2D drawings govern explicit tolerances, threads, and surface finishes.
General Manufacturing Tolerances: Undimensioned features follow international general tolerance standards unless explicit tolerances (such as ±0.010 mm to ±0.020 mm / ±0.0004″ to ±0.0008″ on critical mating features) are specified on 2D drawings and confirmed during DFM review. Computer Numerical Control (CNC) machined metals and rigid plastics follow ISO 2768-mK (ISO 2768-c for Polytetrafluoroethylene [PTFE]).
For sheet metal fabrication, laser-cut flat profiles follow ISO 2768-m and formed bends follow ISO 2768-c across standard nominal size ranges (with ±0.5° to ±1.0° angular bend tolerance). Injection-molded thermoplastics follow ISO 20457, molded elastomers follow ISO 3302-1, and polyurethane vacuum-cast parts are held to ±0.3%.
In-House Production and Confidentiality: CNC machining, sheet metal fabrication, rapid tooling, molding, surface finishing, and quality inspection are executed within Vendor’s in-house manufacturing facilities under strict Non-Disclosure Agreement (NDA) controls. Internal shop-floor scheduling uses anonymized routing travelers stripped of Customer identity to protect proprietary designs per our CAD data security and Privacy Policy.
Quality Inspection and Sampling Standards: Volume production sampling follows ISO 2859-1 (ANSI/ASQ Z1.4), General Inspection Level II, with zero acceptance number (c = 0) under the agreed Acceptable Quality Limit (AQL). Our in-house inspection lab verifies parts before dispatch; formal First Article Inspection (FAI) and Coordinate Measuring Machine (CMM) reports are provided upon request.
Quality Claims Window: If there is any quality problem, Customer shall raise it in writing within 30 days after shipment of samples or parts. Otherwise, it would be deemed that Customer accepts the samples or parts.
Post-Receipt Modifications and Return Analysis: Vendor is not responsible for any damage caused by Customer modifications or secondary finishing after receipt. Vendor may ask to return any non-conforming parts for root cause analysis and disposition.
Customer Intellectual Property Warranties: Customer represents and warrants that all supplied CAD models, drawings, and technical data do not infringe or misappropriate any external rights holder’s patent, copyright, trade secret, or intellectual property rights, and that Customer holds all legal permissions required for Vendor to manufacture the ordered parts.
Export Control and Prohibited Items: All technical data and deliverables are subject to applicable trade and export control laws, including the International Traffic in Arms Regulations (“ITAR”) and the Export Control Law of the People’s Republic of China. Vendor strictly refuses to manufacture firearm components, weapon parts, or items requiring special government manufacturing licenses.
Design Responsibility and Warranty Disclaimer: Customer retains sole legal responsibility for design specifications, functional performance, and material selection. Vendor makes no express or implied warranties of any kind, including any warranty of merchantability, fitness for a particular purpose, or non-infringement, and no oral or written advice creates any warranty not expressly stated herein.
Exclusion of Consequential Damages: In no event shall Vendor be liable for any incidental, indirect, consequential, or punitive damages, including lost profits or production downtime, whether arising in contract, warranty, negligence, strict liability, or otherwise, nor shall Vendor be liable for transit delays, customs holds, or carrier handling damage after EXW handover.
Liability Cap: Under no circumstances will Vendor’s liability to Customer exceed the amount received by Vendor under the given order with respect to any claim related to the given order.
Termination: Customer may terminate this Agreement at any time by notifying Vendor in writing at info@asprototypes.com. However, Customer agrees that it shall compensate Vendor for all fees and expenses incurred in the performance of the obligations up to the date of termination.
Governing Law: This Agreement and any action related thereto will be governed and interpreted under the laws of the People’s Republic of China, and the United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement.
Shenzhen AS Prototypes Co., Limited (AS Prototypes) reserves the right to update these Buyer Terms and Conditions at any time on our official website (asprototypes.com). Updated terms govern all subsequent orders and apply to the fullest extent permitted by applicable law.
For order-specific contractual questions or to upload 3D CAD models and 2D tolerance drawings for complimentary DFM evaluation, please reach our in-house engineering team via our online Request for Quotation (RFQ) and contact portal.



